Verity Rear Vision Systems
A convenient 12V cigarette lighter power plug for powering your Verity rear vision camera system.
Verity Rear Vision Systems
A 2-channel automatic switcher module that seamlessly switches your monitor view from the truck camera to the trailer camera when a trailer is connected.
Verity Rear Vision Systems
The CB001 is a 1-meter, 4-pin male to 4-pin female extension cable, designed to extend the connection between your Verity camera and monitor. Ideal for installations where additional cable length is needed to route wiring cleanly through a vehicle.
Verity Rear Vision Systems
The CB003 is a 2-meter, 4-pin aviation male to 4-pin aviation female extension cable, designed to extend the connection between your Verity camera and monitor. Ideal for larger vehicles or installations where additional cable length is needed to route wiring cleanly.
Verity Rear Vision Systems
The CB005 is a 5-meter, 4-pin aviation male to 4-pin aviation female extension cable, designed to extend the connection between your Verity camera and monitor. Ideal for larger vehicles or installations where significant additional cable length is needed to route wiring cleanly.
Verity Rear Vision Systems
The CB006 is a 5-meter, 4-pin aviation female to female coupler cable, used to join two male-ended camera cables together for added length between your camera and monitor. A simple way to extend cable runs on larger vehicles or custom installations.
Verity Rear Vision Systems
The CB007 is a 5-meter, 13-pin extension cable designed to extend the connection between your monitor and trailer-mounted camera system. Ideal for tractor-trailer setups where additional cable length is needed to reach from cab to trailer.
Verity Rear Vision Systems
The CB010 is a 10-meter, 4-pin aviation male to 4-pin aviation female extension cable, designed to extend the connection between your Verity camera and monitor. Ideal for large vehicles, buses, or installations where significant additional cable length is needed to route wiring cleanly.
Verity Rear Vision Systems
The CB011 is a 1-meter, 4-pin aviation female to female coupler cable, used to join two male-ended camera cables together for added length between your camera and monitor. A simple way to extend cable runs on custom installations.
Verity Rear Vision Systems
The CB012 is a 10-meter, 4-pin aviation female to female coupler cable, used to join two male-ended camera cables together for added length between your camera and monitor. Ideal for large vehicles or installations requiring significant additional cable reach.
Verity Rear Vision Systems
The CB013 is a 10-meter, 2-pin male to female cable designed to extend the connection between your monitor system and a buzzer/alarm accessory. Its aviation-style connectors provide a secure, weather-resistant connection for reliable audio alert signaling.
Verity Rear Vision Systems
The CB015 is a 15-meter, 4-pin aviation male to 4-pin aviation female extension cable, designed to extend the connection between your Verity camera and monitor. Ideal for buses, large trucks, or installations requiring maximum cable length to route wiring cleanly.
The CB018 is a 15-meter, 4-pin aviation female to female coupler cable, used to join two male-ended camera cables together for added length between your camera and monitor. Ideal for buses, large trucks, or installations requiring maximum cable reach.
Verity Rear Vision Systems
The CB020 is a 20-meter, 4-pin aviation male to 4-pin aviation female extension cable, designed to extend the connection between your Verity camera and monitor. Ideal for the largest vehicles, buses, or installations requiring maximum cable length to route wiring cleanly.
Verity Rear Vision Systems
The CB021 is a 20-meter, 4-pin aviation female to female coupler cable, used to join two male-ended camera cables together for added length between your camera and monitor. Ideal for the largest vehicles or installations requiring maximum cable reach.
Verity Rear Vision Systems
The CB080 SAMSARA Video Splitter is a 2-foot adapter cable with a 4-pin aviation male connector (power/ground/audio/video) to a 4-pin aviation female connector (audio/video), plus a color-coded RCA breakout for power and video. Designed to interface Verity and most other camera systems with SAMSARA devices.
Verity Rear Vision Systems
The CB101 is a 1-meter adapter cable that converts BNC, RCA, and barrel-style connections to a standard 4-pin male connector. It allows third-party cameras or monitors with these common connector types to interface with Verity monitor systems.
Verity Rear Vision Systems
The CB111 is a 1-meter adapter cable that converts a 4-pin female connector to an RCA male connector. It allows a Verity camera's 4-pin output to connect to RCA-based monitors, DVRs, or other third-party equipment.
Verity Rear Vision Systems
The CB112 is a 1-meter adapter cable that converts a 4-pin male connector to an RCA male connector. It allows a Verity monitor or DVR's 4-pin input to connect to RCA-based cameras or other third-party equipment.
Verity Rear Vision Systems
The CB113 is a 3-meter adapter cable that converts a 4-pin male connector to an RCA male connector. It allows a Verity monitor or DVR's 4-pin input to connect to RCA-based cameras or other third-party equipment at a greater distance than the standard 1-meter version.
Verity Rear Vision Systems
The CB116 is a 1-meter camera converter cable, designed to adapt connector types between your camera and Verity monitor system for quick, easy integration.
Verity Rear Vision Systems
The CB117 is a compact .3-meter Y-splitter cable with one male connector splitting into two female connectors, allowing a single video signal to be shared with two destinations at once — such as feeding both a monitor and a DVR from one camera.
Verity Rear Vision Systems
The CB118 is a compact .3-meter Y-splitter cable with one female connector splitting into two male connectors, allowing a single video signal to be shared with two destinations at once.
Verity Rear Vision Systems
The CB119 is a compact 10cm camera conversion cable, designed to adapt connector types between your camera and Verity monitor system for quick, easy integration in tight spaces.
Verity Rear Vision Systems
The CB120 is a 20-meter adapter cable that converts a 4-pin male connector to BNC, allowing Verity cameras to connect to BNC-based monitors, DVRs, or other equipment over long cable runs.
Verity Rear Vision Systems
The CB121 is a set of 61cm male and female DC power jack plug cables, used to make or extend power connections for Verity monitor and camera systems. This set includes both a male and female plug for flexible power wiring.
Verity Rear Vision Systems
The CB122 is a 1.5-meter adapter cable that converts a 4-pin female connector to separate male RCA video and audio outputs. It allows Verity cameras to interface with RCA-based monitors, DVRs, or recording equipment that require distinct video and audio inputs.
Verity Rear Vision Systems
The CB124 is a compact 20cm camera conversion cable, designed to adapt connector types between your camera and Verity monitor system for quick, easy integration in tight spaces.
Verity Rear Vision Systems
The CB125 is a compact 30cm adapter cable that converts a 5-pin male connector to a 4-pin female connector, with a built-in jumper wire to bridge the pin count difference. It allows Verity systems using mismatched connector counts to interface easily.
Verity Rear Vision Systems
The CB126 is an adapter cable that converts a 4-pin female connector to an RCA female (yellow) connector, allowing Verity camera systems to interface with video-only RCA connections on monitors, DVRs, or other equipment.
Verity Rear Vision Systems
The CB127 is a compact 30cm adapter cable that converts a 5-pin female connector to a 4-pin male connector, without a jumper wire. It allows Verity systems using mismatched connector counts to interface directly.
Verity Rear Vision Systems
A wiring harness designed for seamless integration with "J" Series monitors, providing reliable power and signal connections for your rear vision system.
Verity Rear Vision Systems
Replacement power harness connecting the Verity SMM07 Mirror Monitor System to the MMK074 mount kit, featuring an 8-pin to dual 4-pin male configuration.
Verity Rear Vision Systems
A 13-pin monitor cable harness designed for reliable connection to "S" Series monitors within Verity Rear Vision Systems.
Verity Rear Vision Systems
The CBC202 is a coiled camera cable designed for semi-truck camera systems, providing a flexible, retractable connection between the tractor and trailer. Its coil design stretches during turns and retracts when not needed, keeping cable slack under control.
Verity Rear Vision Systems
The CBC204 is a coiled trailer cable, providing a flexible, retractable connection between the tractor and trailer. Its coil design stretches during turns and retracts when driving straight, keeping cable slack under control.
Verity Rear Vision Systems
The CBF32YY is a 20-meter "YY" configuration cable with two 4-pin female connectors on each end, designed specifically for the Verity C500 Dual Lens Camera. It allows both camera lenses to run independently over an extended distance to the monitor.
Verity Rear Vision Systems
The CBK202 is a 3-piece trailer camera cable kit, providing everything needed to connect a tractor's monitor system to a trailer-mounted camera. This kit simplifies installation with all the necessary cable components included.
Verity Rear Vision Systems
The CBK203 is a 3-piece trailer cable kit designed to connect three trailer-mounted cameras to a single tractor monitor system. This kit includes everything needed for a complete 3-camera trailer installation.
Verity Rear Vision Systems
The CBK204 3-pc. Trailer Camera Cable Kit includes a 13' blue heavy-duty 7-pin coil cable for a single camera, plus two 3' adapters converting 5-pin sockets to 4-pin male aviation connectors, along with brackets and hardware for a complete installation.
Verity Rear Vision Systems
A purpose-built pull tool for quickly and safely routing 4-pin female connectors through tight cable runs — ideal for rear vision camera installations.
Verity Rear Vision Systems
A purpose-built pull tool for quickly and safely routing 4-pin male connectors through tight cable runs — ideal for rear vision camera installations.
Verity Rear Vision Systems
The CBS202 is a 1-meter, 1-camera socket adapter designed to connect a Verity camera to a semi truck coil cable system, converting the coil cable's 5-pin socket to a 4-pin male aviation connector.
Verity Rear Vision Systems
The CBS203 Trailer Socket is a 3-camera adapter designed to connect three Verity cameras to a semi truck coil cable system, converting the coil cable's sockets to connectors compatible with your Verity cameras.
Verity Rear Vision Systems
The CBS204 is a heavy duty 1-camera socket adapter, designed to connect a Verity camera to a semi truck's heavy-duty coil cable system. Its rugged construction converts the coil cable's 5-pin socket to a 4-pin male aviation connector for reliable, long-lasting performance.
